Hi guys
Anyone have a picture of what tin work goes on the bottom of the barrels.
Thanks Trev
clinker42 Officially Full-On Dubber
381 posts · joined Aug 2008 ·
Lower Cyl Head tin work
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
Futue te ipsum!!!
takis Seriously Crusin Dubber
106 posts · joined Aug 2007 ·
Are you thinking of cool tinware
Is this for type 1?
Is this for type 1?
hellbugged 48's and straight cuts
5,080 posts · joined Apr 2003 ·
sure that's the one you wanted to link bizarre?
Joel Now containing 100\% E-Wang
9,368 posts · joined Feb 2006 ·
a really common mistake people make thinking theyre improving there cooling is putting type3 cool tins on upright motors which actually hinders cooling
upright motors should have these deflector tins and only these
frequently left off by first timers putting the heads on
upright motors should have these deflector tins and only these
frequently left off by first timers putting the heads on
clinker42 Officially Full-On Dubber
381 posts · joined Aug 2008 ·
Its a 1650. It has the two deflectors on it but the tins I put on the top of the cylinders have bolts holes which look to me like their should also be tin work on the bottom.
pod i`ve got to finish this thing one day
4,980 posts · joined Dec 2003 ·
the ones on the edge near where the numbers are ,are for the extra wide tinware for buses
meetings 1st sunday of the month
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
check wbsite for location
All Welcome
http://www.flatfour.org/
and on Facebook https://www.facebook.com/FlatFour
hellbugged 48's and straight cuts
5,080 posts · joined Apr 2003 ·
clinker42 wrote:Its a 1650. It has the two deflectors on it but the tins I put on the top of the cylinders have bolts holes which look to me like their should also be tin work on the bottom.
ahhh okay........
In the centre of this pic there are two big pieces with a large curve then long flat area........ they come around from the rear of 3 and 1 barrels and go below the pushrod tubes. These pieces also bolt to the engines case on the very lower edges of the sump and to the heater boxes (if you still run them)
On either side of the pulley in the picture are two pieces that postion again, below the top cylinder covers against the barrels number 2 and 4
Small pices are easily regonisable from a big dimple in them and they belong here........
The longer ones here........
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
Yep - i am sure that is NOT the one i wanted to link to 🤪hellbugged wrote:sure that's the one you wanted to link bizarre?
😂
Futue te ipsum!!!
clinker42 Officially Full-On Dubber
381 posts · joined Aug 2008 ·
Hellbugged
Thats fantastic, exactly what I was after. Do have a link that includes the names of the items against their numbers.
Thats fantastic, exactly what I was after. Do have a link that includes the names of the items against their numbers.
hellbugged 48's and straight cuts
5,080 posts · joined Apr 2003 ·
not sure they have names........just make em up using thingo, matchamecallit and the whatsamaduber
😉
maybe here....
http://www.shoptalkforums.com/viewtopic.php?f=34&t=107350
😉
maybe here....
http://www.shoptalkforums.com/viewtopic.php?f=34&t=107350
clinker42 Officially Full-On Dubber
381 posts · joined Aug 2008 ·
Hellbugged
In your pic, above your alternator, what is the round piece, looks like it goes on the doghouse shroud behind the alternator. I certainly dont have that part.
In your pic, above your alternator, what is the round piece, looks like it goes on the doghouse shroud behind the alternator. I certainly dont have that part.
matberry Moderator Go hard or go home
8,114 posts · joined Mar 2006 ·
It's the fan. Looks funny because its all pretty & black
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE