Glenn
Newcastle area NSW
Call 0411 274 155
Wrecking 1976 VW. Stripped for spares but some parts remaining
SSP 3.8 gearbox - great condition: test drive in car (if you are quick!) $300 SOLD
4x '76 wheels (4.5inch and special 37P offset) and worn tyres. Need paint: $40 the lot
1600TP engine complete with tin, clutch and rare 34carby (except alternartor and stand) runs with good oil pressure, no leaks but one pot is lazy so suitable for rebuild: SALE WITHDRAWN - I'LL MAKE IT A 1916!
Good emissions-spec fuel tank: $40
Complete wiring harness cut from car, 1976 two-switch steering column, ig switch, key and door handles (matching set), 2-speed blower/vent unit. All there except tail light pigtails: $150
Front seats (3-point mount) good for frames/bases only for fitting aftermarket seats: $40 pr. SOLD
Rear seat: no sun damage but most of the hair has fallen out; put this vinyl on another seat: $20
Other VW parts available - call and ask!
Pay your debts, CxxT
OHH NO NOT ANOTHER 76 BUG GETTING PARTED OUT NOOOOOOOO.
"Styripped"
like a horse...?
.
.....................................
www.dakdakcafe.comi need the head light and blinker relay i think there the same as a bus if ya have 1 post cod
thanks
if u have pm m e
👍👍😂🙅🥷😬🤓
hey mate what do you mean by one pot is lazy?
One pot (piston) isn't working as it should - without doing a full diagnosis, it is suffering a dud spark plug, loss of compression or burnt valve
Pay your debts, CxxT
If this is getting parted out, will you strip out the wiring loom or some of it? I am interested wiper and steering column wiring, but could be persuaded in the whole lot.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
wow noones asked for the bumper yet 😂
matt if you have no joy i think ive got a 74-76 column with all the switches and looms for wiper/indicator and ignition
I would have asked already but am broke the time being lol. from Dylan
It hasn't got a rack & pinion has it? if so, I am interested.
From your ole' mate Jeff
Glen
Whats the chassis like ???
Matt, I can strip the harness (complete - I will cut the shell rather than the loom) and sell with the steering column and door locks if you wish. The wiring has been 'cut and shut' sometime in the past to fit an ignition keypad thingo and has a few extra wires for radios etc but apart from that it should come up well - one of the reasons I bought this car was to use the wring but the fusebox doesn't fit mine. Mail order? Might be best to call me...
Jeff, no R&P as it's a flat-screen;
Dave, chassis is rooted. I may consider fixing it for another project if the $ don't add up too far, otherwise it's scrap
Pay your debts, CxxT
it would be OK if the pans are buggared
Do you still have the front bumper? If so, is it original and rust free? If so, I am interested.
If the chassis is buggered can I have the frame horns and rear torsion out of it to build a gearbox demo stand?
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com VWCOOL wrote:Matt, I can strip the harness (complete - I will cut the shell rather than the loom) and sell with the steering column and door locks if you wish.
All I need is the wiper and indicator plugs that go into the column. It'd be nice to have the associated wires too. It would make the instalation easier of the late column I already have. Might be able to use Joels if he has bits already cut up, save your wiring to keep it with the column & keys etc..
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Have you got a 2 speed air switch? If so dibs on that.
And what condition are the headlight surrounds in?
funbug wrote:Do you still have the front bumper? If so, is it original and rust free? If so, I am interested.
Yes and....no
Pay your debts, CxxT
cam070 wrote:Have you got a 2 speed air switch? If so dibs on that.
And what condition are the headlight surrounds in?
No it is damaged sorry and rims are gone
Pay your debts, CxxT
Well? Any chance I could have the frame horns and torsion out of the wrecked pan?
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com ttriebler wrote:If the chassis is buggered can I have the frame horns and rear torsion out of it to build a gearbox demo stand?
I will be retaining the pan
Pay your debts, CxxT
PM sent
I dream of a day when a chicken can cross a road without being asked for it's motive!
VWCOOL wrote:funbug wrote:Do you still have the front bumper? If so, is it original and rust free? If so, I am interested.
Yes and....no
could you please enlighten?
funbug wrote:VWCOOL wrote:funbug wrote:Do you still have the front bumper? If so, is it original and rust free? If so, I am interested.
Yes and....no
could you please enlighten?
Yes, I still have the front bumper. No, it is not original or rust free...!
Pay your debts, CxxT
Hi Glenn,
PM sent re: steering column.
Cheers
Dave
VW dave:
Column, steering wheel, complete wiring harness (removed from car) and door latches (all with key) $150
Pay your debts, CxxT
Is it a klm speedo and working? If so how much are you asking?
Do you still have the steering shaft (I need the one with the smaller top for the steering wheel) and possibly the lower shaft as well? I will take the whole lot as you advertised it if that is how you wish to sell it, or just the shafts (that is what I would prefer).
From your ole' mate Jeff
Jeff, car has one-piece steering ckumn as it is a 76 flat-screen, but I may be able to help you with a 'small spline' L-Bug column, PM me or call
Hulby, speedo is good: check link below
http://forums.aussieveedubbers.com/viewtopic.php?tid=81825#pid761397Pay your debts, CxxT
PM sent.
From your ole' mate Jeff
