Seller's Name – Lindsay Smith
Suburb / Post Code – East Gresford NSW 2311
Item Description – oil pump puller
Condition – New
Cost - $15 + postage
Email - almetal@iinet.net.au
What Do I have today ?
Well I'm glad you asked !
This is a VW oil pump puller.
It’s used for removing pesky pumps that are stuck in the housing of air cooled vee dubs donks.
This is a great tool to have around and worth its weight in gold when you need one.
HOT TIP: remember to always loosen a few of the crankcase bolts closest to the oil pump, the one above & the one below the oil pump before attempting to extract the pump.
This tool comes with 2 of the “T” extractors, small one is for 1100-1200cc engine oil pumps with the smaller oil ways and the other is for the larger oil pumps used on 1300-1600cc engines.
You just take off the oil pump cover, remove the 2 pump gears, insert the correct "T " into the in and out oil holes of the pump body then place the large C bracket on the threaded "T" in a vertical position and then just wind the nut and this will remove the oil pump body from the crank case
Will be posted in a tough bag
And be 500g
yasdnil01 Seriously Crusin Dubber
135 posts · joined Nov 2008 ·
1 attachment · Log in to view
