Skip to content
Aussieveedubbers

T1 Fan Housing Throttle Cable Tube

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 ·

#779859
Does anyone know where I can get a NEW T1 Fan Housing Throttle Cable Tube?

I know I can get one from CSP in Germany. I believe theirs are made in Germany.

I want quality!


Craig
FringeDweller

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#779861
do u want 36 40 or late style as they vary

u will prob only get S/H ad a clamp to the rear to lock it in place as well makes fittings cable n stuff easier
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#779868
Camo wrote:You can always try these out. I have bought one, but not fitted yet.

http://www.thesamba.com/vw/classifieds/detail.php?id=731107

Kevin
WOW Kev...

You should have bought a box of 'em...

One of the best improvements I've seen that should be on every engine.... IMHO..

LEE

PS: vw54.. Yes, Mine is a pain... I'll have to put a clamp on the end... good idea..
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#779995
Hi

I always weld a tag on the stock tube and put a self taper in it, same idea.

You can see it in this photo of my sons motor.

Steve

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#779999
i used to do the same thing



but its alot of work when a few correctly sized washers, a piece of fuel hose and a clamp do the job just as well with no fabbing needed

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#780010
Hi

The good thing about having it secured is that if you break a cable you can feed it all the way though without getting under car as long as you have the sheaf over the transmission in place.

Just getting back to the original question, just find a tube that fits in the "over the transmission sheaf" snugly and the weld tag on like Joel and I did.

Steve

bushed Wolfsburg Elder

3,541 posts · joined Dec 2006 ·

#780095
sheath = plastic tube

sheaf is a wheat cob of seeds lol
i have few oldies 36hp had a sqre stp plate sim to samba's one
want any vw bits old but like me, Made in Germany!!!

matberry Moderator Go hard or go home

8,114 posts · joined Mar 2006 ·

#780103
Actually a bowden tube or sleeve, I believe.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE

68AutoBug Beetle Restorer - Experience over 138\% - YIKES --

11,654 posts · joined Aug 2002 ·

#780117

EXCELLENT WORK GUYS...

SOMETHING I WILL HAVE TO DO..

BEFORE MY CABLE CUTS THRU THE TINWARE AT THE BACK..

LEE

- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---

BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 ·

#780182
Thanks Guys


I ended up getting one from CSP with some other bits.


CP
FringeDweller

Craig Torrens 6 times Australian, 7 times State Hillclimb Class Champion

8,040 posts · joined Jan 2003 ·

#780186
What car is this for Craig ??🙄


BeetleJuice Officially Full-On Dubber

350 posts · joined Sep 2006 ·

#780188
Craig Torrens wrote:What car is this for Craig ??🙄
It's red and gone from the lounge room into the garage.😂 And thanks for taking the piss!!!!!!!!😂
FringeDweller

Dak-A-Tak Volksie Pete

1,381 posts · joined Jan 2004 ·

#780201
Use a speedo cable outer tube and a zip tie at back , leave it long ,say half way across gearbox .