Is it possible to adjust the camber on a link-pin front end?
how do you go about doing it if it is possible
sander288 "Bolt-on Master"
1,404 posts · joined Aug 2008 ·
Adjusting Camber
68AutoBug Beetle Restorer - Experience over 138\% - YIKES --
11,654 posts · joined Aug 2002 ·
Well,
on a link pin front end...
I don't know that one...
I only know about ball joint front end beetles...
I'm sure someone will be able to help You..
LEE
on a link pin front end...
I don't know that one...
I only know about ball joint front end beetles...
I'm sure someone will be able to help You..
LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
grumble Son of Jim - Creator of Good
2,672 posts · joined Jun 2008 ·
The camber is adjusted with the shims on the link pins,there is a set number of shims and these are fitted according to the offset of the torsion arms.If the front end has been set up correctly the camber should be right.Let me know if you need more info regarding the set up.
From memory it is also covered in the Idiot book.
From memory it is also covered in the Idiot book.