Skip to content
Aussieveedubbers

Labor Governments New Motor Vehicle Suspension Regulations

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

nsuwift Seriously Crusin Dubber

127 posts · joined Mar 2010 ·

#803771
Think it will affect my dad's hot rod.
It's a 1937 hudson terraplane and is
considerably lower than standard.

original height

1 attachment · Log in to view

SuperOwen Fahrvergnugen

868 posts · joined Jan 2009 ·

#803772
I had a quick read and to be honest it sounds fairly reasonable for the most part. Less than 50mm can be self certified, by a competent person. But what I cant see is how a person is deemed competent? Maybe I missed something?

SuperOwen Fahrvergnugen

868 posts · joined Jan 2009 ·

#803775
nsuwift wrote:Think it will affect my dad's hot rod.
It's a 1937 hudson terraplane and is
considerably lower than standard.

original height
There's a bit near the bottom about street rod's. Sounds like they are basically still covered by there own set of rules.

Craig S Wolfsburg Wizard

635 posts · joined May 2008 ·

#803778
Do we have a publication date yet??

On page 5 it says:

"This VSI No. 50 applies to vehicles modified and notified to the RTA or presented to an AUVIS after [publication date + 6 months]"

So we essentially have 6 months post the publication date, which at the top of page 1 is "TBA" to get things lowered under the current rules.

Just as well I'm about to get mine done, not that I would have a problem under the new rules (although with at least a 2 inch drop it would need a blue slip), but how much more of a pain would it be 😬
1969 Beetle - June
1974 L Bug - Gwendolyn
2002 Bora V6 4Motion - Anita

nsuwift Seriously Crusin Dubber

127 posts · joined Mar 2010 ·

#803779
as it sits now. It will come back up alittle
as he has not finishe the fabrication of
the suspension. He stopped working on
his to help me work on my type three.

grogy Custom Title Time!

1,000 posts · joined Aug 2007 ·

#803780
it says no to drop spindles, could affect a few vws

vwjon Fahrvergnugen

914 posts · joined Jul 2006 ·

#803785
is this document just for NSW or is it going nation wide? i'm a little worried, i'm restoring a 59 cadillac, heres a promo pic and as you can see the "trim" is deff in the negative prospective. no engineering trickry here, its a factory promo picture!
vee-dub boys note that dropped spindles are OUT!!!

3 1959 cadillacs
1 musso
2 early notchbacks
2 split kombis
2 split panels
1 split ute
1 low light panel
1 ex-pmg bay
1 country buggy
1 beetle ute
1 14" syncro caravelle
1 16" syncro doka
1 golf cabrio
1 vw camper trailer
2 3meter bombs

zocstar Officially Full-On Dubber

279 posts · joined May 2010 ·

#803787
It's not retrospective.
So if your car has been modified and then rego'd, it sounds like it's ok.
My apprentice was in a rush to get his airbaged hilux signed off on when they announced it, so it wouldn't affect him.

Have they passed this yet?? Or are we in the + 6 months??
'69 Squareback

cam070 Custom Title Time!

1,332 posts · joined Jul 2009 ·

#803795
zocstar wrote:It's not retrospective.
So if your car has been modified and then rego'd, it sounds like it's ok.
My apprentice was in a rush to get his airbaged hilux signed off on when they announced it, so it wouldn't affect him.

Have they passed this yet?? Or are we in the + 6 months??
How can they prove if your suspension was modified before or after it has been rego'ed? Will you have to provide receipts or something?

Also, what is the definition of a street rod?

waveman1500 Also rides a Honda

1,346 posts · joined Dec 2009 ·

#803808
cam070 wrote:Also, what is the definition of a street rod?
A street rod is a special category of registration, with special rules detailed here: http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/street_rod.aspx

Basically, “A Street Rod shall mean a vehicle that has a body and frame that were built before 1949, that has been modified for safe road use, or a replica of a vehicle the body and frame of which were built before 1949. Note that vehicles manufactured in 1949 or later that are carry over models of a vehicle model manufactured prior to 1949, eg Ford Anglia, are included in the Street Rod classification.”

I suppose it could be argued that all Beetles, particularly the earliest shape ones, are carry-over models from a pre-1949 design, but I'm not sure whether you'd win that argument. It would be nice to register a Bug as a street rod though, as they're allowed some very broad freedoms, such as 10" wide wheels for example, and engines up to 7.6 litres.
1972 VW S-Bug - For Sale!
1968-onwards Beetle panels and glass for sale

SuperOwen Fahrvergnugen

868 posts · joined Jan 2009 ·

#803814
Were drop spindles ever legal in nsw?

zocstar Officially Full-On Dubber

279 posts · joined May 2010 ·

#803822
cam070 wrote:How can they prove if your suspension was modified before or after it has been rego'ed? Will you have to provide receipts or something?

Also, what is the definition of a street rod?
Page 10, Yup that's what it says.
Under 5cm either recipts or stat dec.
Over 5 a report from the rta.
'69 Squareback

Klaus Custom Title Time!

1,439 posts · joined Aug 2004 ·

#803827
you can go more than 50 just need eng cert. but not more than 150 . still has thw 100mm law , think most of this is towards newer cars and 4x4's old cars would more than likely be in a case by case .

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#803852
Hi

I think this new VSI50 is a step in the right direction, 150 mm is almost 6 inches.

Never been keen on dropped spindles.

The hot rods have very strict rules about what is a hot rod and will never allow that to change, even for US style cars post 1948 and would never allow a VW to be treated as a hot rod.

Steve

Klaus Custom Title Time!

1,439 posts · joined Aug 2004 ·

#803874
alot of business will be lost if it does pass , 6 inch drop is not much for a splitscreen bus , most of that is with the change of tyre

Bizarre Moderator The artist formerly known as blue74l

12,789 posts · joined Aug 2002 ·

#803895
SuperOwen wrote:Were drop spindles ever legal in nsw?
Not that I know of
Futue te ipsum!!!

waveman1500 Also rides a Honda

1,346 posts · joined Dec 2009 ·

#803913
Klaus wrote:alot of business will be lost if it does pass , 6 inch drop is not much for a splitscreen bus , most of that is with the change of tyre
Change of height by changing tyres isn't included in that particular document, that's why they go to very careful lengths to define 'trim height'. Basically you're allowed 50mm by suspension drop without a report, or 150mm by suspension drop with a report, and then some other amount by tyre choice which is defined in a separate paper. I haven't read that one but the end result is that the minimum legal height is still 100mm.
1972 VW S-Bug - For Sale!
1968-onwards Beetle panels and glass for sale

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#804145
allegedly, a young bloke has his air baged car parked in a car park, car nearly sitting on the ground,while he is at work and gets a defect for his being lower then 100mm.
the car has a engineers report and a adjustment of records on the rego papers matching the engineers cert saying air bags fitted.
So my question is why the defect for being lower then 100mm??????????????????????????????
allegedly the police do the rite thing as he had to check the car and owners detail on the net to write out the defect notice.??
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#804148
Hi

I guess that if the car has air bags fitted it must still comply with minimum height requirements of 100 mm, whether its driving or not.

Steve

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#804151
I dont see any air bag cars like that, they all sit down low🤪🙅🤪 so
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#804152
Hi

I followed a Hi Lux the other day, it was dragging the arse on the ground with the front in the air, what happens to headlight aiming in that case, up in the trees I would guess.

Before Rose says anything about being online, I've been working on my bug all day.

Steve

Special Air Service Chief "Gunna"

1,769 posts · joined Oct 2004 ·

#804154
1303Steve wrote:Hi

I guess that if the car has air bags fitted it must still comply with minimum height requirements of 100 mm, whether its driving or not.

Steve
The way I read it, is that adjuctable ride heights must not be able to be adjusted whilst the vehicle is mobile. Dumping it on the ground while staionary in a car park etc should be legal. Thats how I read it.

Which I think is the current regulation on that issue anyway.

Cheers
Brendan
Calling all NSW Mid North Coast Veedubbers

Click Below
Mid North Coast VW

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#804158
Special Air Service wrote:
1303Steve wrote:Hi

I guess that if the car has air bags fitted it must still comply with minimum height requirements of 100 mm, whether its driving or not.

Steve
The way I read it, is that adjuctable ride heights must not be able to be adjusted whilst the vehicle is mobile. Dumping it on the ground while staionary in a car park etc should be legal. Thats how I read it.

Which I think is the current regulation on that issue anyway.

Cheers
Brendan
yeah allegedly this car was park and the owner was at work,
the young bloke come in late to day when we were leaving work to go home, He had to get the defect cleared and it was as easy for him to just push a button.🤪 and the car was 100mm 🤪
maybe we didnt get the whole story.
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

bus914 Custom Title Time!

1,230 posts · joined Aug 2002 ·

#804189
A Type 3 is equipped with "variable height suspension control system" (aka splines) and so can be slammed to minimum clearance 😂 see point1, on page 4.

Also the "Ground clearance over peak in road" method is totally dependent on wheelbase. So a large car can not be as low to the ground as a much shorter vw.

Go the Type 3's.👍👍
[img]https://i4.ytimg.com/vi/KOKlJpsfCyk/default.jpg[/img] Click the thumbnail for video👍

squizy Thinking about another dub...maybe

4,082 posts · joined Dec 2002 ·

#804212
Ho hum.

1 attachment · Log in to view

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#804215
bus914 wrote:A Type 3 is equipped with "variable height suspension control system" (aka splines) and so can be slammed to minimum clearance 😂 see point1, on page 4.

Also the "Ground clearance over peak in road" method is totally dependent on wheelbase. So a large car can not be as low to the ground as a much shorter vw.

Go the Type 3's.👍👍
Hi

Type 3s have a shorter wheel base than 1302 & 1303s.

I don't want to get all political but if the Labor government gets the boot next year, the shadow roads minister Andrew Stoner is likely to get that portfolio, please go to his website and register for his newletter http://www.andrewstoner.com.au/

At least he listening now, it may a different matter if he actually gets the job

This the email I received from him

Dear Steve

This morning, I obtained a copy of the Keneally Labor Government's latest plans to introduce their long-feared harsh new vehicle suspension regulations.

A copy of Labor's latest VSI-50 regulation can be found here.

I am in the process of going through the document and speaking with affected 4WDers and car enthusiasts.

Please email me and let me know what you think of Labor's latest vehicle height regulations.

Regards Andrew Stoner

1303Steve Scirocco Rare

8,650 posts · joined Aug 2002 ·

#804216
ian.mezz wrote:
Special Air Service wrote:
1303Steve wrote:Hi

I guess that if the car has air bags fitted it must still comply with minimum height requirements of 100 mm, whether its driving or not.

Steve
The way I read it, is that adjuctable ride heights must not be able to be adjusted whilst the vehicle is mobile. Dumping it on the ground while staionary in a car park etc should be legal. Thats how I read it.

Which I think is the current regulation on that issue anyway.

Cheers
Brendan
yeah allegedly this car was park and the owner was at work,
the young bloke come in late to day when we were leaving work to go home, He had to get the defect cleared and it was as easy for him to just push a button.🤪 and the car was 100mm 🤪
maybe we didnt get the whole story.
Hi

This is all grey area.

So if you have bald tyres on your car could it be defected in a car park like the guy was defected with the air bagged car?

I'm not agreeing with the guy getting booked, just discussing it.

Steve

waveman1500 Also rides a Honda

1,346 posts · joined Dec 2009 ·

#804217
There's nothing grey about it, a car park is a road-related area and hence your car must be registered and comply with all roadworthiness rules. If it was on private land such as a driveway, then you could legally argue that they have no right to defect you, but in a public road or road-related area, parked cars are fair game.

As far as I can work out, the main reason that you're not allowed to leave parked cars slammed to the ground is that it makes it too difficult to tow your car away if your are parked illegally. Rules are rules nonetheless.
1972 VW S-Bug - For Sale!
1968-onwards Beetle panels and glass for sale