bikecrazy Casual Dubber
24 posts · joined Sep 2010 ·
got a 32/36 weber on a beetle 1600 run fine but the linkage setup is crap anyone got a pic of how they have oe setup so i can fabricate something
32/36 weber linkage
vwo60 Veteran Volks Folk
2,036 posts · joined Feb 2007 ·
i fabricated this linkage and aircleaner to fit into a 36HP engine bay, uses the standard cable, with a shaft pivoting across the back of the manifold and a short ball joint linkage to pull the carb actuation arm, work perfectly
1 attachment · Log in to view
btc-er Commited Dubber
72 posts · joined Jul 2009 ·
Interesting setup. Do you have any more photos?
1303Steve Scirocco Rare
8,650 posts · joined Aug 2002 ·
Hi
I've done a few with a longer cable going around a pulley and then back to the throttle.
Steve
I've done a few with a longer cable going around a pulley and then back to the throttle.
Steve
Bizarre Moderator The artist formerly known as blue74l
12,789 posts · joined Aug 2002 ·
been years - but I thought my prog just connected straight up??
Futue te ipsum!!!
OZ Towdster Keen to finish some projects
1,921 posts · joined Dec 2003 ·
Mine always hooked straight up too , but mine was fitted 180 deg around to how vwo60 has his fitted , with the main benifit of it being reversed as with vwo60's , that you can at least get to the idle jet .
But if you run a good fuel filter and arn't pulling the Carby apart everyother day then the idle jet placement although difficult to get to is not that bigger problem
But if you run a good fuel filter and arn't pulling the Carby apart everyother day then the idle jet placement although difficult to get to is not that bigger problem
Don't let body work get in the way of real suspension travel
barls Administrator Causer of Chaos and Mayhem
9,473 posts · joined Jun 2004 ·
fit the webber copy off a lada niva. bolts on with linkage in the right spot and all adjustments at the back in easy access.
“We all pay for life with death, so everything in between should be free.” Bill Hicks
the chaos project - click me
the chaos project - click me
jsheppard64 Officially Full-On Dubber
323 posts · joined Mar 2008 ·
sorry... but is it a DFEV or something
mine is a DGV5a (throttle turns other way) I ended up making my own manifold because the fuel surge around when i turn its fitted with the float side facing to the front of the car
mine is a DGV5a (throttle turns other way) I ended up making my own manifold because the fuel surge around when i turn its fitted with the float side facing to the front of the car
bnicho Wolfsburg Wizard
436 posts · joined Feb 2009 ·
Yes, these carbies are supposed to have the flat facing the front of the car. I always wondered if fuel surge is a problem when they are placed the other way around.
Also, is icing up a problem with these carbs?
I have used these carbies for years on other cars and I have plenty of spares. But I haven't dared fit one to Olive yet.
Cheers,
Also, is icing up a problem with these carbs?
I have used these carbies for years on other cars and I have plenty of spares. But I haven't dared fit one to Olive yet.
Cheers,
Brett Nicholson
Melbourne, Victoria
1974 VW Superbug L - Olive 😎
1971 Morris Mini Moke - Mopoke
1966 Austin Mini - Audrey
1965 Morris Mini Traveller - Trixie
2007 Land Rover Freelander 2
2009 Nissan Pathfinder
Melbourne, Victoria
1974 VW Superbug L - Olive 😎
1971 Morris Mini Moke - Mopoke
1966 Austin Mini - Audrey
1965 Morris Mini Traveller - Trixie
2007 Land Rover Freelander 2
2009 Nissan Pathfinder