Hi All,
I am chasing one piece glass for my 54.
I sold some replacement panels to someone in WA to take his one piece back to vent windows. Think his name started with a S and he is a member on here. If anyone knows who I am talking about please let me know.
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
Pm sent
and another pm
1957 Oval type IV
1956 Oval poss project
1954 Oval impossible project
Ass 70's Beetles
http://www.users.on.net/~rogerbyrne/index.htmThanks for the PM 66brm, 57 oval I didn't get yours.
Thanks
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
sent PM again
1957 Oval type IV
1956 Oval poss project
1954 Oval impossible project
Ass 70's Beetles
http://www.users.on.net/~rogerbyrne/index.htmThat was me
Will have a look if i still have them
Still looking for some stuff for mine too
Cheers
Steffen
im chasing the main door glass for a passenger door on a 54 if anyone is willing to part with 1, dont need the qtr glass, just the door large window,cheers
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
Hey Vw Steve, I am sure i have windows.
If you can hang til the weekend I can have a look.
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
yeh no rush, all good
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
vwsteve wrote:im chasing the main door glass for a passenger door on a 54 if anyone is willing to part with 1, dont need the qtr glass, just the door large window,cheers
I believe the door glass are the same left or right...
its just the bottom piece that is different... ?
LEE
- Helping keep Air Cooled VWs on the road - location: SCONE in the Upper Hunter Valley - Northern NSW 320 kms NNW of SYDNEY---
they are different as the SEKURIT etching would face to the outside to the rear top of the glass
good luck t54
fractal geometry; the inner most limits of mind altering abuse
Fantasy
http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels
www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
Does anyone know if the mechanism would be different? Could I just use my 54 Mechs, take out the quarter window and run plexan 1 piece windows? i was thinking of doing the little cutout like the standard split 1 piece windows?
T54
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
from what i know and past cars you need dual lift regulators otherwise the window will fall over
1 1963 356b porsche coupe
2 1960 karmann ghia cab
1 1965 karmann ghia cab
1 1966 karmann cab
1 1961 split ute
1 1967 split p/van
1 1952 standard bug
1 1963 ragtop
1 1960 ragtop
2 1954 ovals
1 1956 oval baja project
1 1957 oval flying flea
Turbo54 wrote:...Could I just use my 54 Mechs, take out the quarter window and run plexan 1 piece windows? i was thinking..
T54
noooooooooooooo what are u thinking
🤪fractal geometry; the inner most limits of mind altering abuse
Fantasy
http://seventhchronicle.com
Z = Z2 + C1/r = 1/0 = infinity
Barrels
www.barrelman.com.au
VW Workshop - aircooledgarage.com.au
allcooled.com.au
I found the one pieca glass windows.
You will not be able to use your 54 winders.
Funny I am still trying to reverse what the PO did and you want to do it to yours well each to their own .
Anyway the glass is here you can have it if you like.
The window winders that the PO made for the car were any later style winder mechs but he cut the ends of and then rewelded them on shorter and on an almost right angle facing up.
Unfortunatly I cut them apart and rewelded them together straight trying to put everything back to stock.
Also you will need to cut out the metal bit that holds the 1/4 window in place (that was the oiece you send to me all that time ago but it needs welding in so I have been waiting for the next paint job...)
How about we just swap doors....🙂
ps
How good are your doors, mine are mint. No Rust no bog.
Heath
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
my doors are good too one has a skim of bog under the chrome trim but I did that myself and as this was my first attempt at bodywork may not even have needed it.
but no rust.
youre in sa though arent you how is the transport gonna work any ideas?
Fancy a drive?
Not sure. Let me think about it.
Heath
C'mon kids gather round,
there's a new sensation hitting town,
It's moving straight, low to the ground,
it'll pick you up when your feeling down.
I would actually
i used to live in adelaide for a while
but the fuzz put a canary on my car so its of the road
and not sure how i pay for the 1350$ worth of petrol😉
