Skip to content
Aussieveedubbers

Hello, a quistion about subi to bus mod:

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

matan stolero Learner Dubber

3 posts · joined Apr 2011 ·

#838367
Hi all, i'm working on fitting a subaru ej22 to my vw bus trans.

For doing that i need an adaptor plate. i have and agaptor plate wich fit the old models of subaru engine (ea), is there any way i can modify it that it will fit the ej enigne?

Ben386 Officially Full-On Dubber

244 posts · joined Apr 2010 ·

#838470
Do youself a favour,get a bellhousing.Speak with Richard Jones of RJES.

ahoogah Seriously Crusin Dubber

135 posts · joined Oct 2009 ·

#838489
matan stolero wrote:Hi all, i'm working on fitting a subaru ej22 to my vw bus trans.

For doing that i need an adaptor plate. i have and agaptor plate wich fit the old models of subaru engine (ea), is there any way i can modify it that it will fit the ej enigne?
I think you'll find all e series are same pattern.

rocknrob Insano Dub Head

844 posts · joined Dec 2003 ·

#838496
nope...no way it will fit however if all you need is the plate(you will need flywheel too) i could help you out with CAD drawings for laser cut

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#838501
Fail rob I have a 1 x adapter plate only left here lazer cut
$70.00 + $25.00 post
Looking for that special lady : PM me for coffee & cake

rocknrob Insano Dub Head

844 posts · joined Dec 2003 ·

#838505
seagull wrote:Fail rob I have a 1 x adapter plate only left here lazer cut
$70.00 + $25.00 post

you won't beat that...laser cutting alone cost me $120


geez Neil tempted to buy that as an investment😂

Joel Now containing 100\% E-Wang

9,368 posts · joined Feb 2006 ·

#838520
ahoogah wrote:I think you'll find all e series are same pattern.
Nah they're mongrel things, EA81 is different to EA82 and both are different to EJ.

Subaru got it right and made all EJs the same

ttriebler Officially Full-On Dubber

321 posts · joined Jan 2008 ·

#838528
Only 2 bolts different on an EA to an EJ. You can modify to fit. But why bother. Do it right and get Seagulls.
Reversed gears for Subaru transmissions.
Fit a Subaru 5 speed to your rear engined car
www.subarugears.com

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#838538
Its here Rob

I have cheap * New * turbo 2.5 ltr pistions & 207 / 257 con rods for sale as well ( there in the for sale section )

PS There is a nice small Toyota water to air inter cooler as well
Looking for that special lady : PM me for coffee & cake

rocknrob Insano Dub Head

844 posts · joined Dec 2003 ·

#838561
Neil you are like a salesman for the devil...i shouldn't listen but i am interested in the water to air....i am supposed to be spending money on my house!

matan stolero Learner Dubber

3 posts · joined Apr 2011 ·

#838562
Thx all, so from what you said it won't fit. i thought about building an adaptor plate between ea to ej bellhousing and solder it to my adaptor plate, that would fix the depth difrence between the ea and ej (12mm) and fit to the ea patern on my corrent plate, what do you think about that solution?

seagull can you please email me with some detail i may be itrested on youe plate.

seagull Compulsive Aussie Vee Dubber

4,979 posts · joined Dec 2003 ·

#838580
do away with the adapter plate you have EA
Just fit a EJ adapter plate, these are 12mm thick
PS ( we have no idea were you are located so please fill out your profile ) also you dont have the link in this area so we can not email you

Postage is in Australia 🙂
Looking for that special lady : PM me for coffee & cake

matan stolero Learner Dubber

3 posts · joined Apr 2011 ·

#838589
ok, so all i have is getten a ea to ej adaptor. any ideas where can i find a sketch of that adaptor?

seagull updated my info on my profile.