Skip to content
Aussieveedubbers

Positive Front wheel camber?

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

dubai Seriously Crusin Dubber

161 posts · joined Oct 2009 ·

#853883
Guys please excuse my drawing but its to give you the idea I have Positive camber on my Front Left Hand Side wheel and it basically just like in the drawing to the same degree. Its something that I need your advice on how to correct or what is the cause?

It think its beyond using the adjusting camber nuts on the link pin fron end but am open to advice i think it must of had a hit in the front but nothing is obvious or bent Also I have a noise that has developed in the front end I am thinking its a broken leaf sping in the torsion beam is this possible? I have replaced tie rods steering rods so its not this. Any input is appreciated.

Thanks Guys

1 attachment · Log in to view

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#853886
what sort of vw??
you can adjust shims on early bug.
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

dubai Seriously Crusin Dubber

161 posts · joined Oct 2009 ·

#853902
Hey its a type 1 1962 bug tell me about the shims adjustment any drawings or references?

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#853909
dubai wrote:Hey its a type 1 1962 bug tell me about the shims adjustment any drawings or references?
http://www.historicvws.abelgratis.com/technical/king_pin/king_pins.htm
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

vw54 Administrator Always Waiting 4 Friday

16,723 posts · joined Aug 2002 ·

#853915
you have something BENT the trailing arms and stub axles need to be checked in the origional VW jigs

where abouts are you
I read it on FACEBOOK so it must be true


http://forums.aussieveedubbers.com/viewtopic.php?tid=91278&page=1#pid848630


http://forums.aussieveedubbers.com/viewtopic.php?tid=63561&page=1#pid624099


http://forums.aussieveedubbers.com/viewtopic.php?tid=4832&page=1#pid452603


http://forums.aussieveedubbers.com/viewtopic.php?tid=60650&page=1#pid574409