Skip to content
Aussieveedubbers

car trailer

0 likes
Share Share on Facebook Share on X Share on Reddit

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 ·

#870066
Hi guys, im looking at getting a single axle car trailer built and was wondering if anyone with a single axle car trailer could tell me roughly how far from the rear of the trailer the axle is placed? And ideally how much weight should be on the towball? Wanting to drive the beetle straight on.

Thanks
mick.

Stanley I guess the reward is in the doing of it

4,523 posts · joined Mar 2003 ·

#870075
Your tongue should have a weight stamped on it or your towbar or even car specs. eg mine is 100kgs suggest 50-75kgs
The rest is a bit subjective as it depends on trailer dimensions (draw bar length) and car weight but in particular the Centre of Gravity of the whole thing (sorry i'm a weight and balance engineer by trade).
As long as the car axle is aft of the car CG and don't exceed the draw bar weight no problem. Trailer CG is easy to work out as you build. Car CG can also be worked out.
Probably doesn't help much. I can give you my dimensions but it may vary for yours.

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 ·

#870076
Thanks mate, that would be helpful. If anyone has any pics or design ideas that would be cool too.

Stanley I guess the reward is in the doing of it

4,523 posts · joined Mar 2003 ·

#870077
PM me your email

bevoracing Officially Full-On Dubber

327 posts · joined Jan 2009 ·

#870299
When you build a single axle car trailer, you build the frame first, then put a piece of 2” pipe under it on the shed floor, put the (race) car on it, then roll it back and forth on the pipe to find the spot where you can only just lift the draw bar, 80kg or so. Mark it there and put the axle in that spot.
If you buy a trailer, and intend to put a VW on it, I would suggest you get prepared to cut the axle and guards off and re-position them correctly. Anything else will just have you out in the paddock. Good luck.
Tony
Country Buggy King & Link Pin Overhauls, Type 1 & 2 King Pins, General Machining.
http://forums.aussieveedubbers.com/viewtopic.php?tid=74138
My car is KO813

11CAB If ya got it....Baja it

4,674 posts · joined Aug 2002 ·

#870332
Here's some pics of Stanley's trailer







65 Meyers Manx
68 Country Buggy (KO 367)
68 Country Buggy (KO 669)
68 Country Buggy (KO 789)
68 Country Buggy (KO 815)
68 Baja Bug
76 Baja Kombi Twincab

Stanley I guess the reward is in the doing of it

4,523 posts · joined Mar 2003 ·

#870350
Thanks Graham. That was Warwick 2009 I think. I designed and built it to weigh less than 1000kgs with car which is the towing capacity of the lancer.

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 ·

#870375
That's such a neat trailer, im actually going to have a look at another trailer on Sunday, its a duel axle but the price is right. See how it goes.

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 ·

#870783
Looks like i have purchased the trailer i looked at on sunday, thanks for the advice guys.