Skip to content
Aussieveedubbers

boost sensitive reg carby turbo

0 likes
Share Share on Facebook Share on X Share on Reddit

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#918761
hey guys what sort of boost refrence fuel reg do you use or know of can be used for a carby setup and any help with line and pump choice before i buy the wrong one 🙂

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#918771
we have stock holley reg and pump,
and a
"TP" or Turbo Prep carbs. Street drivers, sand toys or drag beast.
We take new carbs and set them up for all out power making turbo use.
But the best part is if you want the best carb to drive on you cant beat OUR "TP" Holley's!
Smooth power and easy adjustments!

Each carb comes with "Turbo Adjust-A-Jet."
With this neat main block you no longer have to change main jets.
No more opening of the float bowl and spilling all that fuel.
Just turn the main screw that is located on the top of your carb to make your combo run more rich or lean!
Its that easy to adjust the size of your main jet!
You will not carry jets any more
😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲

bajachris88 The international telephone dialing code for Antarctica is 6

6,661 posts · joined Apr 2005 ·

#918840
cgbmotorsport.net sells all the second hand turbo gear for the Renault 5 Gt's, including the stock turbo prepped blow through carbs for $165 AUD (depending on exchange rate), also includes the stock fuel pumps and boost dependant fuel pressure regulators for fairly reasonable prices.

IF you want new, you could also go on ebay for rising rate fuel regulator or boost fuel regulator etc. This new one is $39 from ebay http://www.ebay.com.au/itm/FUEL-PRESSURE-REGULATOR-PK7EG-RISING-RATE-EFI-TURBO-UNDER-18-LBS-BOOST-NEW-/221065279865?pt=AU_Car_Parts_Accessories&hash=item3378847979
(ô_!_/ô) (ô_!_/ô)
69' baja: kombi box, thing spindles, irs, disc front, type 3 rear drums, 2 inch lift kit, 31x10 rears. 👍
New engine in process: 94mm p&bs, 74mm C/w chomol Crank, 35.5x39 SP heads, turbo. Wierd combo, hopeful torque monsta!

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#918880
bajachris i think its only efi

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#918884
ian is it only holley that you do and have you blown through them not just draw through

psimitar Son of Jim - Creator of Good

2,506 posts · joined Jan 2009 ·

#918900
depending on the size of engine the Renault 5GT Turbo carb, fuel pump and turbo would be a simple bolt on exercise with a bit of fabrication 🙂

Cheap as chips too 😀
madness is in the eye of the beholder 👍

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#919020
thanks mate have looked into it

1916baja Custom Title Time!

1,990 posts · joined Sep 2007 ·

#919026
I think you'll find ians comment is a copy and paste from lowbugget.com.... They do vw turbo set ups. That's where Ian and rose got their turbo motor from.

bugzla Custom Title Time!

1,164 posts · joined Jun 2007 ·

#919036
thanks buddy

ian.mezz I never said, I could write or spell

3,913 posts · joined Sep 2004 ·

#919042
http://www.lowbugget.com/main_page.html

autobarn etc sell the holley pumps & regs .

😂🤪😂🤪😂
car forums. where a lot of peoples good intentions end up taking a good old car off the road forever never ever to see the road again. 🥲