I have what I believe is a twin SU manifold for a 36 or 40 hp motor It has the marking "DC552" on the smaller of the manifolds
See attached photos
Can any one confirm that this is a Monaro brand manifold and how do you tell the difference between the 36 and 40 HP manifold ??
more photos
Now all you need the linkages and 1 1/8 H1 SU carbys and linkages and air filters.
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
36hp and 40hp are different diameters at the head, 36 obviously being the smaller
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
yep 36hp are smaller
very nice set up for the early sixties performance gear
Thanks Guys
Do you know the dimensions of the 36 and 40 HP heads ? And what is it measured at OD or ID ??
Any Idea of value on the market ??
Looks like they have been bastardised to take later h2 carbs? Are there studs welded on the top and bottoms with threaded holes below them?
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
You"re spot on there. Yes they appear to have the studs welded on and there is a threaded hole below them
What is the h2 carby
H2 is a later model su carbs. The base gaskets below show the difference between a h1 & h2 mounting flange.
Customer service is not dead in Australia.
Always after HAZET & MATRA & VW factory tools
