Some kilowatts were found today. My car was just below the DB limit on a DB meter, to be on safe side I stuffed some chicken wire up the exhaust, I thought it had been removed, it was found to be still in place, I think some of my missing kilowatts are here.
okay, that's the guys at Toombul. I get a few bits and pieces from them as well and they are not far from my place. got my window net, fuel fittings, roll cage foam, race boots and socks, and a few other bits.....good guys there.
as for the chicken wire, nah, you probably still got the upper hand; your older (more experianced), you got struts -more cmaber, and heaps of electronical wizardry in that beast of yours.....
I gather you upped the boost from 15-16psi to around 20psi to get the final figures. Are you going to ran that as standard pressure or do you have a boost controller so you can back it off for day-to-day running?
shouldn't have any trouble doing a burn-out at the weekend then.....
I'm not sure how to compare flywheel torque to torque at the wheels, this was the result that the tuner had predicted, I'm pretty pleased as this is a stock low kilometre motor and will last a long time, so apart from changing cams or turbos or even stroking it out to 2.2 this is it.
Steve
Craig Torrens6 times Australian, 7 times State Hillclimb Class Champion
If I can do a 13.0@103mph with only 8psi boost & 152kw @ the wheels, taking it easy off the line
u will do an easy 12 with 20psi boost & 204kw! U could do a 12 in reverse!....................then drive back to the staging lanes without a tow car...................
After the failure of my front tyres after Wakefield and the tyre importers saying that cracks are normal and not to worry, I had some ADVAN Neova AD08R fitted today. Cant wait to try them.
I'm curious how those bars will work also. I installed a set of 944 bars in mine and it feels awful stiff, but I don't have the engine or anything in it yet so hopefully that helps soften it up a bit. As is though, I can't even bounce on the rear of the car with my full weight (240lbs) and get the rear end to move.