Skip to content
Aussieveedubbers

Multi-rib pulley for type 4 Fan/Pulley

0 likes
Share Share on Facebook Share on X Share on Reddit
Log in to reply

mackaymanx Custom Title Time!

1,611 posts · joined Jan 2006 ·

#983439
Been playing around with this, pulley is from a VS commodore harmonic balancer. This is just pushed together with a bit of interference at the moment, would need to be silver soldered or brazed together as the pulley is cast iron. Might see if I can chase down a steel pulley so I can get it spot welded on.


Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."

[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]

vlad01 Compulsive Aussie Vee Dubber

4,270 posts · joined Jun 2010 ·

#983498
have you tried parting the balancer and using the center 3 spoke hub coupled with a center adapter, which then can bolt to the crank with the fan possibly.

otherwise there are aftermarket billet balancers for commodores.

71 notchback,
Past owner of, 70 NB, 73 SB and 72 FB TLE

mackaymanx Custom Title Time!

1,611 posts · joined Jan 2006 ·

#983504
A centre adapter would work but I didn't want to disrupt the airflow with the spokes and hub. I'll keep looking for something more suitable, next time I'm at the wreckers.
Quote of the week
"Do I wish to send them to you again, nope, no interest can't be bothered really, to much hassle for little or no return."

[IMG]https://www.vw-mplate.com/mplate2-18600.png[/IMG]