Selling a CB Performance Blow-Through turbo kit.
Duel 45 dellortos DRLA's (turbo spec)
Turbo- schwitzer s2a (aka borg-warner) .42 a/r
Turbo exhaust system, MSD distributor set up.
Custom made tinware that lets you close decklid while running a filter much larger than that shown in photo., Distributor just been rebuilt.
This setup can be used on any VW .
Located in Sydney, will be removed from engine . can post.
..PM or call 0422 936 236 Nicholas
Now that is cool
Dan
So this is most of the parts required to complete a long block build up yeah?
Allbones yeah I think thats right.
This set up makes one HELL of a sounds - what dreams are made of!
Follow the Photo Fun:
http://forums.aussieveedubbers.com/viewtopic.php?tid=95238
- '70 1500 Beetle (The Clean One)
- '76 1300 Beetle (The In-between One)
- '69 1500 Beetle (The Mean One)
I want to so bad, but then I have to put a gearbox to take it behind it aswell, ahahaha.
bah just be easy on the clutch.
What about the carby needs rebuilding?
'59 or Kombi?....feeling confused
'59 bug
'68 bug
'82 import T3 BUS. aircooled
The Right Carb had water in it. This was due to a open/raised deck-lid.
It has been pulled apart but now need to be assembled
Just to clarify:
The sale includes:
- CB performance hide-away turbo kit
- dual carbs 45 dels - fully setup for turbo application
- Manifolds and linkage with the (turbo covers)
- full turbo and exhaust system
- MSD 6AL distributor
- Custom built tinware
This system is designed to fit under the deck-lid
Nice... how much for the whole motor set up...?
just because its a kit car... doesnt mean its not a vw!
You could buy the whole car for $22,000, It has absolutely everything imaginable done and done properly over $50,000 spent on it over 15years, Would swap for a Kombi.
some more info on Turbo system and photos pf exhaust.
Blow Through Schwitzer T-3 turbo & adjustable wastegate, Dual Dellorto 45 DRLA carbs modified for blow through turbo
Exhaust - CB performance with O2 sensor, jet hot coated, MSD Billet Distributor PN8485
Up-date. .. . a number of people that enquired ,rang or sent me a PM were concerened about the cost to assemlble the cardby so I have had Adrian at POWERTUNE reassemble it, so all doneand ready to go!
For sale complete CD Blow through Turbo System. Includes it all... Manifolds, linkage, Webers, Exhaust, Custom Tinware, MSD complete system and the turbo. Ready to instal and enjoy. $2300. located in Manly
txt Nicholas 0422 936 236 or send PM
Hi.......you mentioned whole car for sale. can you please include some pics of the car
Hi will the dry sump and the J tubes be included? is this kit ready to bolt on and go?
"If at first you don't succeed, skydiving is not for you." - Anonymous 🥷
sorry rado, Car is being kept for now.
Empi the j-tubes are included. Im not sure what a dry sump is. However i know the kit can fit all busses, ghias, beetles.
Anyone can fit it- just need tuning with MSD and fuel lines connected etc
One of the best sounding and running turbo kits available for Dubs. Great for either a street car, project or even a drag machine!
In the photo of the under side of the engine, the sump has a pipe to the turbo i assume lubricating the turbo?? (Possibly says Claude Buggies on the sump plate)
"If at first you don't succeed, skydiving is not for you." - Anonymous 🥷
Keen as. Contacted you via text
That's a deep sump with what looks to be the turbo oil drain into it... The turbo is lubricated by somewhere there is oil pressure.
Performance Upholstery
Cars, boat seats, furniture and more!
0439002870
performanceupholstery@live.com.au
Mt Gravatt east Qld.
Ok so is deep sump included?
"If at first you don't succeed, skydiving is not for you." - Anonymous 🥷
PM Sent
"If at first you don't succeed, skydiving is not for you." - Anonymous 🥷
Price Drop $2200.
System can be sold separate without the MSD ignition system. All boxed and can be shipped interstate.
PM me for questions etc
what size engine was this on? and how soon did it see boost?
'59 or Kombi?....feeling confused
'59 bug
'68 bug
'82 import T3 BUS. aircooled
It's was on a 2276! Can't remember when the boost came in sorry!
Follow the Photo Fun:
http://forums.aussieveedubbers.com/viewtopic.php?tid=95238
- '70 1500 Beetle (The Clean One)
- '76 1300 Beetle (The In-between One)
- '69 1500 Beetle (The Mean One)
yeah ^^2276cc and boost was 3000RPM onwards🙂 hell of a ride
Need it SOLD to move on to new project so open to offers over $2000.
Have the Dells been correctly turbo prepped?
ie: turbo seals on the inner throttle shafts. Neoprene top gaskets, larger needles & seats with viton seal & heavier spring on the needle.
What boost pressures have they been run to?
Also, I can't see an adjustable wastegate in your pics.
Does your setup come with fuel press reg. and associated fittings?
The Dels are fully setup for turbo and only run to 9 lbs on a very cold day. The setup was for 6-7psi. The waste-gate is adjustable and connects off the exhaust. A simple Turn of a screw lets for more boost if needed. My engine was high comp so i didnt/couldnt run too much boost.
This is 100% complete and just needs to be installed/fitted.
Thanks for all the offer and interest guys
Price reduced to $2150 ONO.
