yes it is bent,don't worry guy's,
it is bent 2'degrees per side for a reason.i might not know what that reason is but when i remember i will let you know.lol
as for the ride hight it only will go higher if i buy new shocks,fuck that.it does actually sit on the ground with the adjuster out .
i made the spinldles 70 drop alittle to much i think.
we have also taken out one of the torsion bars and replaced it with a sway bar internally.
will post some more on mon or tues
down sharon.
here's a few more pic's of the action so far.
should have heaps more done tommorrow.
down sharon.
I have never had my hand in that pink box.
It was grey when I was there, and had a bit of black around the edges.
Coming along nicely Westi!
westi wrote:That's mad Alan.
THAT GUY ON THE LEFT AINT DOIN MUCH
YOU PROBABLY HAVENT BEEN STOCKING HIM
WITH ENOUGH DOHNUTS
HOW DID THE CAGE LOOK WHEN YOU CAME IN THIS MORNING
DID YOU HEAR BACK FROM GEERS YET
SEE YA TONIGHT FOR ANOTHER SESSION
STOCK😵💫👍👍
🤘
STOCK
the gay fat guy on the left is asking for more donuts.
in the next picture which i did not have the heart to show anyone,you can actually see the moment were his heart shatters from hearing that they have none left.
it's quite funny and sad all at the same time.
nah, no geer's
cage needs more wd
as for the session .cones or donut's(eating session).since i have to say no to drug's you must mean donuts.
you look pretty full in the photo,r u sure you can fit some in,i bought 20 subway cookies today .but i don't know if they will last to long.
down sharon.
THEY SHOULD DO FOR TONIGHT
BUT MAYBE YOU BETTER GET A FULL TIME COOK
ON HAND SEEING THOUGH HOW MANY HOURS
IM PUTTING IN A MANY CANT WORK ON AN
EMPTY STOMACH
🤘
STOCK
one tubby tubby.two tubby tubby.
down sharon.
Great progress Westi, its looking sweet.
You know because of how your building this im going to have to put in so much more effort detailing my chassis when time comes to assemble it after is been blasted and painted...
r u sure dave i found a tag heuer watch in there,if it ain't yours,woho i hit the jackpot.
it won't take much effort to make it nicer than mine,we are just aiming for neat and nice,oh and light.most inportantly light.
it will make a quick litle car alot quicker,hopefully.
cheers for the comments guy's keeps me going on these cold misurable nights.
update front finished,brakes.lines, tank ,steering needs alittle more playing but nothing major.hym's are a litle to close on full lock,if i'm using that much lock it means i am in a hole world of hurt.
i will try to put up some more pics tonight.
down sharon.
Amazing.
You've put in such a huge amount of high quality work. I think it's tops that it's painted up nice to do it justice.
The only problem is that you'll have to think up another number plate now.
CYA CT
esratrams
yeh your right,
it has been bothering me for a while.
i am open to sugestions.nothing is to silly.
down sharon.
PNKBITS 😂
Reub
PNKBOX
This disclaimer does not reflect the thoughts or opinions of either myself, my company, my friends, or my dog: don't quote me on that; don't quote me on anything; this disclaimer is subject to change without notice; text is slightly enlarged to show detail; resemblance to actual persons, living or dead, is unintentional and coincidental; dry clean only; do not bend, fold, or mutilate; anchovies or jalapenos added to this disclaimer upon request; your mileage may vary; no substitutions are allowed; for a limited time only while supplies last; offer void where prohibited; this disclaimer is provided "as is" without any warranties expressed or implied
😂
i think we are on the wright path.
keep them coming
down sharon.
Since fan housing and box are 'that' colour, I realy like PNKBITS,
on the other hand, if ONLY the box was 'that'colour, I think I'd prefer PNK-BOX, got a nice ring to it [tag heuer I believe].
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
Great stuff westi - as long as you lot are eatin donuts and not punching donuts then all is cool 🙂
Very impressed by a lot of the fabrication work and the speed at which you work!
Keep it up.
Al
om.18.ox
oh my box
it available i checked last week
this build is bull$hit
good one mat/al as for the punching the only form of that going on is the constant sledging we put on each other(we tried punching a donut it would fit)
k-love OMYBOX looks better don't you think.
i am still not sold on pnkbts or pnkbox not yet anyway.
keep them coming and i will try to think of something also.
maybe we can put two together.
as for the build i have been busy ,it is getting very close.
greasing bearings .getting the box in,setting up arse end etc etc.
will try to post up some more pic's fo you guy's sooon.
down sharon.
I TOLD YOU BEFORE MATE
DOEDOA
(Doe doer) I THINK IT PRETTY MUCH SUMS IT UP DON'T YOU
STOCK
🤘
STOCK
MOCKYS or FLANY go's with the westi tag but PINKBOX gets a big tick in my mind, my wife just said SHAZA all junk with pink bits galore
EVERLAST CONCRETE TANKS
1800 552 123
Hey Westi, lookin' good mate.
I made the mistake of showing my wife your pink box (meant in the nicest possible way) trying to spark an interest in drag beetles.
She says quote "why don't you paint your whole car pink and then I might come and watch you race".
Please help me....this is one of those lose lose situations.
stanley.your on you own buddy.
i have no response what so ever that could help you.
good luck with your colour choice.
down sharon.
i might have to do some leaopard print to go with the plate shaza
down sharon.
Hey Westi, Look'n good as always mate.
All this talk of pink
and not a Pagey to be seen.
Heard he's putting on a bit of colour.
Matt Berry Motorsports...air cooled advice, repairs and mods Ph 0408 704 662
OFF-ROAD,CIRCUIT,DRAG,STREET,ENDURANCE
sounds good
down sharon.
Looking good mate. Can't wait to see it in the flesh.
ACCEPT THAT SOME DAYS YOU ARE THE PIDGEON AND SOME DAYS YOU ARE THE STATUE
Alder Outlaws VW Racing - check it out on fb!!
me too.
i am getting excited,can't wait for the first test run
down sharon.
Need update pics Now !! stop hiding behide Pinkbits ,Westi . Pagey is lurking in the back ground .Work in shed to be done !
Great stuff, should be a beast.
it's all top secret.lol
i will post some pic's up later.
i did find that the head was leaking.cfm wise.
the barrel was about a 1 mm from seating.
so we started all over again.
it now flows 164cfm @ 10',or 78 percent of 210 @ 10's @ 598 lift.throught the head only.i have cut the manifolds in half to make sure it has a nice flow from manifold to head.it also made it a bit easier to see how much more material could be removed.
don't worry pagey i will keep you posted.
down sharon.
